SOS ARDUINO ANGEL!

This is a practical project using Arduino and a LED in order to give a message in Morse code.

Here's how you can use the Morse Code:

Here's how to create a code with Arduino to turn off a LED light with a SOS signal:

• Download the software at this link
• Understand the rules of Morse code
• Converter the rules of Morse in Arduino instructions
• Open the Arduino software
• Connect a LED in pin number 13 and GND of the Arduino board like this image

• to work Arduino you need to open the device administrator(Administrador De Dispositivos)

• Click on Dispositivo Desconocido. Later click on update the software, because the pc don't recognize the device.

• Click on search software of controller of the PC

• You are doing these to configurate Arduino

• Click on examinate to search the configuartion of Arduino

• You need to instal a software for recognition of the Arduino

• You click on drivers and acerpt, and now Arduino are recognize

• When you click on acept, you click on next

• Now you click on tools and port, and click on the name of your Arduino to set up

    void setup()
{
  pinMode(8, OUTPUT);
}

void loop()
{
  //S
    digitalWrite(13, HIGH);
  
  delay(200); // Wait for 200 millisecond(s)
  digitalWrite(13, LOW);
  delay(200); // Wait for 200 millisecond(s)
    
  digitalWrite(13, HIGH);
  delay(200); // Wait for 200 millisecond(s)
  digitalWrite(13, LOW);
  delay(200); // Wait for 200 millisecond(s)
  
    digitalWrite(13, HIGH);
  delay(200); // Wait for 200 millisecond(s)
  digitalWrite(13, LOW);
  delay(200); // Wait for 200 millisecond(s)
  //O
  
    digitalWrite(13, HIGH);
  delay(600); // Wait for 600 millisecond(s)
  digitalWrite(13, LOW);
  delay(600); // Wait for 600 millisecond(s)
  
    digitalWrite(13, HIGH);
  delay(600); // Wait for 600 millisecond(s)
  digitalWrite(13, LOW);
  delay(600); // Wait for 600 millisecond(s)
  
   
  delay(600); // Wait for 600 millisecond(s)
 digitalWrite(13, HIGH);
  delay(600); // Wait for 600 millisecond(s)
  digitalWrite(13, LOW);
 
  //S
  
   digitalWrite(13, HIGH);
  delay(200); // Wait for 200 millisecond(s)
  digitalWrite(13, LOW);
  delay(200); // Wait for 200 millisecond(s)
  
   digitalWrite(13, HIGH);
  delay(200); // Wait for 200 millisecond(s)
  digitalWrite(13, LOW);
  delay(200); // Wait for 200 millisecond(s)
  
   digitalWrite(13, HIGH);
  delay(200); // Wait for 200 millisecond(s)
  digitalWrite(13, LOW);
  delay(200); // Wait for 200 millisecond(s)
  
  //spacc between sos and Angel
 
  //A
  
  digitalWrite(13, HIGH);
  delay(200); // Wait for 200 millisecond(s)
  digitalWrite(13, LOW);
  delay(200); // Wait for 200 millisecond(s)
  
  digitalWrite(13, HIGH);
  delay(600); // Wait for 600 millisecond(s)
  digitalWrite(13, LOW);
  delay(600); // Wait for 600 millisecond(s)
  
  //N
  
   digitalWrite(13, HIGH);
  delay(600); // Wait for 600 millisecond(s)
  digitalWrite(13, LOW);
  delay(600); // Wait for 600 millisecond(s)
  
    digitalWrite(13, HIGH);
  delay(200); // Wait for 200 millisecond(s)
  digitalWrite(13, LOW);
  delay(200); // Wait for 200 millisecond(s)
  
  //G
  
   digitalWrite(13, HIGH);
  delay(600); // Wait for 600 millisecond(s)
  digitalWrite(13, LOW);
  delay(600); // Wait for 600 millisecond(s)
  
   digitalWrite(13, HIGH);
  delay(600); // Wait for 600 millisecond(s)
  digitalWrite(13, LOW);
  delay(600); // Wait for 600 millisecond(s)
  
      digitalWrite(13, HIGH);
  delay(200); // Wait for 200 millisecond(s)
  digitalWrite(13, LOW);
  delay(200); // Wait for 200 millisecond(s)
  
  //E
  
      digitalWrite(13, HIGH);
  delay(200); // Wait for 200 millisecond(s)
  digitalWrite(13, LOW);
  delay(200); // Wait for 200 millisecond(s)
  
  //L
  
      digitalWrite(13, HIGH);
  delay(200); // Wait for 200 millisecond(s)
  digitalWrite(13, LOW);
  delay(200); // Wait for 200 millisecond(s)
  
    digitalWrite(13, HIGH);
  delay(600); // Wait for 600 millisecond(s)
  digitalWrite(13, LOW);
  delay(600); // Wait for 600 millisecond(s)
  
  
      digitalWrite(13, HIGH);
  delay(200); // Wait for 200 millisecond(s)
  digitalWrite(13, LOW);
  delay(200); // Wait for 200 millisecond(s)
  
  
      digitalWrite(13, HIGH);
  delay(200); // Wait for 200 millisecond(s)
  digitalWrite(13, LOW);
  delay(200); // Wait for 200 millisecond(s)